044-24486363 / 64
|  +91 944 404 3414
vibrotech@gmail.com
  • Online Continuous Monitoring System Viber M2

VIBER M2TM

VIBER M2TM is a 1 or 2 channel machine guard. The M2 can give an alarm or stop the machine if vibration indicates failure. The M2 is designed for standalone guard, but can send information into a programmable controller or to other monitoring system.

Each Chanel has:

  • Three adjustable measure ranges
  • Two independent alarm levels with manual or auto reset
  • Frequency ranges can be set by embedded switches
  • Current output proportional to the vibration level 4- 20 mA, suitable for connection to a PLC
  • Monitoring of transducer and cable failure
  • Analysis signal on BNC and terminal output

Click Here to Download Catalogue

  • Online Continuous Monitoring System Viber 41

VM41TM(10 Channel Online Continuous Monitoring System)

Maybe you need to monitor multiple points.

VM41 Rack system can measure up to 10 measuring points simultaneously.

Alarms, relays and mA outputs are standard.

Every channel has:

  • Analysis output
  • mA output(RMS)
  • Independent alarm and trip relay functions
  • Transient and voltage protection on every input and output

The Base frame has:

  • Common power unit for all channels
  • Power supply 24VDC, 110VAC and 220VAC
  • Screw terminals for cable connections
  • Channel switch
  • Display for alarm and vibration level of selected channel

Click Here to Download Catalogue